*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
…restoring the overpolished steel to approximate a factory-like level of reflectivity.)
Yes. the work took 2 years but Scott only charged me $700 and that included his cost for the wood and a new set of replacement screws. $1100 in the rifle and it's a favorite shooter. If I'd been more
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
… It shoots about 6" high at 25yds. I am shooting 255 gr. lead reloads. Someone has filed the front sight (21A) to a point and it is about .170" from the bbl. to the top of the sight bead. I have adjusted the rear (Marbles) sight down to as low as I can, both the V insert and the notches
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
…s Guide to Handloading. Another copy, bit more, but still below average:
https://www.alibris.com/booksearch.detail?&invId=17939990770&pwork=1239436&_ptid=5Nv03vHgBCI
…“recall”, they don’t turn up all that often. But scarcity is only one factor. Demand must also be addressed: Taking into account zero hunting/target interest, and near zero collector interest, understandably the Model 40 market is extremely “soft”….
Recent Model 40 Skeet Gun sales noted: •SN7,…
… two-barrel set, Ulrich factory engraving, Rock Island Auction $5,500.
SN1966, Bismarck ND gun show, $700
SN304, Sioux Falls SD gun show, $800
SN51, private sale $1,200.
SN1194, aftermarket engraving & wood upgrade, with provenance establishing
…that went "cheap" b/c they were inaccurately described. For example I paid $2750 (hammer price) for my very nice (and fully documented) M70 "Van Orden Sniper" in a Rock Island Auction where the Van Orden provenance was not recognized in the description. By contrast, the three documented
…it inadequately or misspells an important name that defeats the trolls and search engines. The writer Terry Weiland has secured a gorgeous custom .270 rifle because the online seller spelled its maker "Beisen".
I've not seen the elephant or heard the owl but have twice scored minor wins on GB
….
I do not have any antique Winchesters yet, but I have a couple of modern Winchesters made by Miroku, and a post 64 model 94 made in 1970.
This is my new manufactured 1892 in 44 Magnum. It was a gift from a friend and just a small portion of God's blessing on me!
And
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
…on top of a 48,000 psi pressure vessel and pulling the trigger would be,for me, the ultimate act of faith in the gas handling capacities of the Model 70 action, plus a Candygram to whoever headed, formed, and loaded the case. Pass.
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
…?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=186210441214&targetid=2295557532190&device=m&mktype=pla&googleloc=9032941&poi=&campaignid=20382379140&mkgroupid=156347004450&…
…#038;rlsatarget=pla-2295557532190&abcId=9316959&merchantid=114625298&gad_source=1&gclid=Cj0KCQjwlZixBhCoARIsAIC745DM3eY-ZeiV
…Jason-
Despite surveying pre-64 M70s on a daily basis, I tend to pay little attention to prices. So what I say below may or may not reflect the current market. I would suggest that…
…you go to the Rock Island Auction site and search Past Auctions (Premier and Sporting/Collector) for "Winchester 70 257". I'm reasonably sure you can find at least a half dozen sold examples in the past couple years that you can compare to the condition of your…
…it might give you a "top dollar" figure for your rifle.
That said, it seems to me that clean (98%) all original (no added holes) pre-war M70s in 30 GOV'T'06 have climbed to as much as $3250 in the last couple years. The 257 ROBERTS is a sought after chambering as it is less common
…on the photos. He said even though the rear receiver had been drilled and a scope fitted, the scarcity of the rifle being a pre-war Type 1 Model 70 in .257 Roberts makes it sought after.
Highly sought after, by anyone intending to shoot it--as opposed to lock it up in a gun safe. This
…on the photos. He said even though the rear receiver had been drilled and a scope fitted, the scarcity of the rifle being a pre-war Type 1 Model 70 in .257 Roberts makes it sought after.
-Jason
…seen a lot of odd things done to firearms over the years but I’ve never seen a bullpup model 70.
I’m not sure who would buy this but to each his own I guess.
https://www.gunbroker.com/item/1045124644
…sell on eBay for $475 (low) to $600+ (with box and rings). They are a decent scope for the money although I prefer the Lyman Super Targetspot or Unertl for the 52C and later vintage rifles. My earlier rifles have Feckers.
Best Regards,
…for it. The gun is very tight and in great shape for it's age. Nothing has been done to it by my Dad, but can't say what happened to it before 1970. I am not an arms expert, but it does not look like it has been modified or restored.
I have the paperwork and the gun was manufactured on June
…for it. The gun is very tight and in great shape for it's age. Nothing has been done to it by my Dad, but can't say what happened to it before 1970. I am not an arms expert, but it does not look like it has been modified or restored.
I have the paperwork and the gun was manufactured on June
…charter.net said
I took my "new" Model 1892 (1898 DOM) out for some shooting today. I was testing several different loads targeting 1150-1250 FPS. Out of 60 rounds fired, 14 split like shown in the attached pictures. I have loaded hundreds of 44-40 loads without ever losing
…took my "new" Model 1892 (1898 DOM) out for some shooting today. I was testing several different loads targeting 1150-1250 FPS. Out of 60 rounds fired, 14 split like shown in the attached pictures. I have loaded hundreds of 44-40 loads without ever losing
*** Sorry, all the search terms matched were in html attributes (such as image source) and are not displayed in the results excerpt
…into fixing your old guns when the time comes, or will tell you when he can’t do it right.
I’ll drop in and see him soon, I’ll even pick up that M70 Super Grade you are having repaired for me. 😉
Mike
Very true, I do think the bond building is important and I like to stop by there and
…into fixing your old guns when the time comes, or will tell you when he can’t do it right.
I’ll drop in and see him soon, I’ll even pick up that M70 Super Grade you are having repaired for me. 😉
Mike