Log In
Members
Home
Add Reply
Add Topic
Offline
Opinions on using the above by John Kay, (good, bad or indifferent) in restoring Winchester Red hue on gun stocks.
Any other alternatives that might be better?
Thank-you.
Indifferent. I have never used this product. Do you really need the red? Have you tried any oil at all. Most anything will bring life back to a dry stock. If the wood was sanded then you need some type of stain. I mix my own. Walnut with some mahogany. When the gun was brand new it had a certain amount of red but as it aged it faded. That is what you want unless the gun has been restored to brand new.
I have a 92 with heavily sanded gumwood stocks. my winter project was to put new black walnut on it (keeping the original stocks aside if I ever choose to sell it). While the John kay came with a disclaimer stating that results and color may vary depending on variations in the wood grain etc., I still expected a trace of red. I followed the instructions carefully sanding using different grits between coats, let it soak in after wet sanding for several minutes before wiping it off, and waiting 4 days in between every application. The gun in the foreground of the photo is the end result after 9 coats of John kay,behind it are original pre 64 stocks for comparison. While I kind of like the brown it’s not really what I expected for all the time it took.
My new wood results probably aren’t a good comparison to your refinish (if it was red the 1st time it’ll probably be red this time to) but if I did this again I agree with Chuck, i’d experiment with a stain then oil. What ever you decide I hope you post photos when done.
I have a 92 with vigorously sanded gumwood stocks. my winter venture was to put new dark pecan on it (keeping the first stocks aside on the off chance that I ever decide to sell it). While the John kay accompanied a disclaimer expressing that outcomes and shading may change contingent upon varieties in the wood grain and so forth., I despite everything anticipated a hint of red. I adhered to the directions cautiously sanding utilizing various corn meal between coats, let it absorb after wet sanding for a few minutes before clearing it off, and holding up 4 days in the middle of each application. The weapon in the frontal area of the photograph is the final product after 9 layers of John kay,behind it are unique pre 64 stocks for examination. While I sort of like the earthy colored it’s not so much what I expected for constantly it took.
My new wood results likely are certainly not a decent correlation with your resurface (on the off chance that it was red the first occasion when it’ll most likely be red this opportunity to) however in the event that I did this again I concur with Chuck, i’d explore different avenues regarding a stain at that point oil. What ever you choose I trust you post photographs when done.
1 Guest(s)
