Hello,
I recently acquired a Winchester Model 71 Deluxe. However it appears the leaver is loose or drooping. Any pressure to the locking bolt and it drops down. Do anyone have any suggestions as I want to get this rifle in the field for the PA rifle season. I have not yet fired the rifle as I am waiting on a Williams FP-71 sight. I was hoping to avoid a gunsmith trip and wondering if it is a fix I can do.
Thank you,
Aaron
November 8, 2011
OfflineI’ve had a couple 71s with this problem. As memory serves me, both guns had problems with the plunger on the lever that snaps into the receiver bottom. One was stuck and wouldn’t move and the other had a small chip out of the receiver bottom where that pin engages.
I don’t know what’s wrong with yours obviously but I’d start there
January 27, 1992
OfflineWhen I had that problem, I used Kroil and a tooth brush handle to work the plunger in and out until it finaly popped out. This was not a five minute fix. I worked with it several times a day for three days before getting the plunger to pop out. Good luck and be patient. RDB
1 Guest(s)
Log In

