Forum -

1953 Model 70, 375H&H rear sight

Add Reply

Add Topic

Jeff M

Member

WACA Guest

Forum Posts: 18

Member Since:
March 18, 2019

Offline

September 12, 2020 - 10:34 pm

I have a 1953 in 375H&H with a missing rear sight. Hole spacing is 1.75″. Did Winchester ever make a rear sight with this hole spacing?

Jeff M

Member

WACA Guest

Forum Posts: 18

Member Since:
March 18, 2019

Offline

September 14, 2020 - 11:50 pm

Is it possible that it was fitted with the “African Sight?” I really don’t know what the hole spacing for that sight was.

Jeff M

Member

WACA Guest

Forum Posts: 18

Member Since:
March 18, 2019

Offline

September 27, 2020 - 9:46 pm

Update: Not meant for an African sight which has 2.175″ hole spacing.

seewin

Member

WACA Member

Forum Posts: 463

Member Since:
March 12, 2008

Offline

September 28, 2020 - 1:50 am

The 375 spacing was 1.240″ C-C would be the correct spacing for a 1953 rifle. Straight taper 375’s had a 1.760″ C-C spacing for the 2 holes on top of barrel. These never had sights mounted in the holes. These barrels were the same dimensions as the heavy target barrel used on the target model, which had a telescope mounting base attached in those particular holes. The straight taper 375’s that I own both have 22G sights in a dovetail behind the 2 holes. This barrel would not have been used on a 53 rifle, they were all pre wars.

Steve