Log In
I have a model 67 that has what appears to be two factory dovetails for the rear sight one on the barrel and one on the reciever.The rifle is in excellent condition and does not appear to have been rebarreled. I found pictures on the internet of several rifles like it with a sight on the barrel and a plug the the dovetail on the receiver. Did Winchester ever send anything like this out from the factory.
thanks
charles
July 21, 2010
Offline
69 or 67 – the thread title says one but the text says the other?
If it’s a 69 then it is possible that it is a “parts cleanup” Model 69 assembled when Winchester was using up unneeded Model 69 parts in favor of the 69A.
July 17, 2012
Offline
Charles,
I assume you have a 69 since the 67 does not have a separate receiver.
3Dub is correct, during the parts cleanup for the G6901R and G6902R in 1939-1942 Winchester mated G6902R barrels with dovetail for the 32C with G6901R receivers with dovetail for the 96B. A blank was installed in whichever dovetail was not needed. I have seen quite a few like that.
There is a book available on the subject of the Model 69 that covers that topic and illustrates examples of parts cleanup rifles. It is found at RimfirePublications.com or in the “Store” then “Books” tab above.
Best Regards,
WACA Life Member #6284 - Specializing in Pre-64 Winchester .22 Rimfire
1 Guest(s)
