Log In
Anyone know what size hole to drill when tapping 3/16 after. Do you drill the same size drill bit or a little smaller ?
AG
September 28, 2016
Offline
A #21 is the perfect size, 5/32″ is a couple thou. smaller. This would be for a 10-32 screw…..
Erin
September 28, 2016
Offline
Seems small, but I could be wrong….. Deer hunting in Missouri so I can’t measure it for you.
Erin
No worries Erin. Someone might be able to confirm.. Enjoy your trip. Wish you a successful harvest.
AG
November 1, 2013
Offline
Why worry about drilling & drill bits? A radiator hose clamp solves the problem.
clarence said
Why worry about drilling & drill bits? A radiator hose clamp solves the problem.
Well that might be the fix Clarence. Thought somebody might know. Maybe a good epoxy will work also.
AG
October 29, 2019
Offline
Weld it. LOL
Shoot low boys. They're riding Shetland Ponies.
Erin Grivicich said
A #21 is the perfect size, 5/32″ is a couple thou. smaller. This would be for a 10-32 screw…..
Erin
Erin the 5/32 drill bit was the correct size to drill before tapping 3/16-36 for the front upper small tang screw. Thanks for the help.
AG
1 Guest(s)
