Log In
July 4, 2023
Offline
My forearm is loose on my model 63 any tips before I tear into it?
July 17, 2012
Offline
Other than the usual pre-requisites such as use the correct sized screwdriver it is a pretty simple disassembly. The looseness can be caused by the tenon block loose in the barrel dovetail but is more likely simply wood shrinkage. Both are easily correctable.
Best Regards,
WACA Life Member #6284 - Specializing in Pre-64 Winchester .22 Rimfire
July 4, 2023
Offline
JWA, I removed the forearm on my 63, It is the tenon block that is wore on the dovetail , Can you help me locate a new one? I did a quick search with no results,
Thank You Jeff
July 17, 2012
Offline
Hi Jeff,
The usual sources seem to be out of stock but I would try calling Wendel at Outback Gun Parts, he usually has a good assortment of Winchester odds and ends. http://www.outbackgunparts.com/index.html
You might try shimming it first with some thin brass shim stock. That should work for quite awhile.
Best Regards,
WACA Life Member #6284 - Specializing in Pre-64 Winchester .22 Rimfire
1 Guest(s)
