Log In
Members
Home
Add Reply
Add Topic
Offline
I Have everything I need to convert one of my 92s to DST EXCEPT the pins .
Can somebody help me with the pin dimensions for the different pins . It appears by the tang that there should be 4 pins .
OR
I would buy the pins if you can supply.
Thanks ,
Wayne
I would use drill rod if I were doing it, I would buy the right size drills and grind them to the right length. To cut them I would use a dremel or bench grinder to grind through a littler longer than you need then grind them to the correct length.
Bob
WACA Life Member--- NRA Life Member---- Cody Firearms member since 1991 Researching the Winchester 1873's
Email: [email protected]
Thanks Bob but I believe there is one pin that is stepped and another with a flat side . I was hoping somebody would have the specs for the pins .
Wayne
Wayne
I’ve got a couple of sets here, I’ll PM you in a day or so if that will work
V/R
Mike
1 Guest(s)
