Log In
January 27, 1992
Offline
Some years ago I purchased a box of new W-W 38-55 brass at a gun show. I just dug it out of storage and discovered that it all the brass has been resized to 32-40. What a surprise. I do not own a 32-40, but could use 38-55 cases. Any suggestions on the best way to reforming them back to 38-55? Is this possible? Or perhaps find someone who would like to trade? Any help will be appreciated. Thanks. RDB
April 15, 2005
Offline
Roger,
Short of trying to fire forming them, you are stuck with mis-marked 32-40 brass.
WACA Historian & Board of Director Member #6571L
November 7, 2015
Offline
I prefer correct headstamps on cartridges whenever possible as I load for 38-55, 32-40, 32 Spl and 30WCF; all can be made from 38-55 brass. If you can expand the case mouth to accept a light .38-55 bullet you may be able to fire form them back to near the correct dimensions with a light powder charge. The 32-40 cases could also be resized and fire formed to 30 WCF or 32 Spl if you need brass for those cartridges.
Mike
1 Guest(s)
