Forum -

In need of 1886 Ejector

Jeffrey Shermer

North Carolina

Member

WACA Member

Forum Posts: 5

Member Since:
June 26, 2023

Offline

January 20, 2026 - 4:33 pm

Recently a friend of mine got a 40-82 octagon in the gun shop. I’d spoke for it, but when I ran a dummy round through it, we noticed the ejector is broken. I’ve looked everywhere on Internet with no luck. Would anyone possibly have an 1886 Ejector I could purchase? I would be extremely grateful. -Jeff

Attachments

IMG_20260103_101339593.jpg (1 MB)
IMG_20260103_101349944.jpg (764 KB)

Anthony

Member

WACA Member

Forum Posts: 1316

Member Since:
December 9, 2002

Offline

January 20, 2026 - 5:54 pm

Jeff,

You might want to remove you’re phone number and use the PM, system provided here on the forum. It’s labeled “Inbox”, on the top bar, below the heading.

You won’t have issues from members here, but this is a World Wide Web!

Anthony

Jeffrey Shermer

North Carolina

Member

WACA Member

Forum Posts: 5

Member Since:
June 26, 2023

Offline

January 20, 2026 - 7:40 pm

Good point, and thanks for the reply! Hopefully someone will stumble across this and have one. At this point I’m starting to wonder if there are any ejectors out there at all😅

oldcrankyyankee

Member

WACA Member

Forum Posts: 1041

Member Since:
February 17, 2022

Offline

January 20, 2026 - 11:46 pm

Jeffrey Shermer said
Good point, and thanks for the reply! Hopefully someone will stumble across this and have one. At this point I’m starting to wonder if there are any ejectors out there at all😅

I would try John Madl. He wrote a book on 86’s and believe he works on them. Or our own Mark Douglas at Wyoming Armory. Both are true gentlemen.

Jeffrey Shermer

North Carolina

Member

WACA Member

Forum Posts: 5

Member Since:
June 26, 2023

Offline

January 21, 2026 - 12:27 am

Thank you sir, I do appreciate it! I had reached out to Wyoming Armory and Mark a couple weeks ago but they don’t have any either right now. I’ll try and send John a PM!

gene66

Member

WACA Member

Forum Posts: 51

Member Since:
March 25, 2024

Offline

January 21, 2026 - 2:09 am

Jeffrey try old arms of idaho I saw one up there now original Winchester hope this helps gene 66

Jeffrey Shermer

North Carolina

Member

WACA Member

Forum Posts: 5

Member Since:
June 26, 2023

Offline

January 21, 2026 - 2:17 am

Gene66, I’ll try and give them a call again. I don’t see one on their website right now, but I haven’t been able to get an answer on their phone. It may be worth a try. Thank you!

Jeffrey Shermer

North Carolina

Member

WACA Member

Forum Posts: 5

Member Since:
June 26, 2023

Offline

January 21, 2026 - 5:28 am

oldcrankyyankee said

Jeffrey Shermer said
Good point, and thanks for the reply! Hopefully someone will stumble across this and have one. At this point I’m starting to wonder if there are any ejectors out there at all😅

I would try John Madl. He wrote a book on 86’s and believe he works on them. Or our own Mark Douglas at Wyoming Armory. Both are true gentlemen.

Would you happen to know how to contact John? From the looks of his last login, it was 2014 on his last login. Not sure how else to make contact?