Log In
Members
Home
Add Reply
Add Topic
Offline
HELP WITH .22 CAL RIM FIRE SEMI AUTO
I have a High Standard The Victor. It seems to have a cylinder where when the bullet goes in its a little tight. I have another High Standard and nice and loose. The bullet on this one slides right in. What would cause The Victor to be a tight fit? I clean it and all is good for a short time. Sometimes the bullet does not get all the way in and a jam occurs. Is this something that happens over years. Can this area be sanded slightly without damage? Hope for help from someone that knows. Thanks Ron
Hi Ron,
Most of us here are Winchester fans and you probably will not get a lot of response from the members since it is not our primary knowledge base.
I suggest you post on the Rimfire Central Forum to get a quicker answer. They have a dedicated High Standard section of the forum here:
https://www.rimfirecentral.com/forums/forumdisplay.php?f=49
Hope that helps.
Regards,
WACA Life Member #6284 - Specializing in Pre-64 Winchester .22 Rimfire
1 Guest(s)
