Log In
Members
Home
Add Reply
Add Topic
I have 7 Ballard rifles in various bores. Several are in 32-40 and I want to pre-load several hundred rounds to take to the range. Where can I find the casings? Are they reformed from a current cartridge or can they be purchased, ? Also would need the proper dies and are they available? I haven’t shot these rifles in a long time and was going to sell them at auction, but just couldn’t let them go. Decided to shoot them again. Last shot at an ASSRA shoot in Indiana.
Online
Cases & even loaded ammo are “around,” but usually take some time to find. Cases have been made up in batches in recent years; they sell out, then become hard, but certainly not impossible, to find. Dies are still in production, but expensive.
However, here are some available right now on ebay: https://www.ebay.com/itm/32-40-Ballard-Winchester-Snap-Caps-Cowboy-Action-Western-1894-32-Dummy-Rounds/283706483153?hash=item420e3961d1:m:m7eAuM2lYeZfZOwlyJ0TtVA
The seller is calling them “snap caps,” because that’s the only way to get around eBay’s prohibition on selling ammo.
Should you eventually decide to part with some of your Ballards, I’d appreciate hearing about what you have. My email: [email protected].
Graf’s shows Winchester in stock:
https://www.grafs.com/retail/catalog/category/categoryId/781?
Quality Cartridge & Midway have it on backorder:
OW1892 said
Graf’s shows Winchester in stock:https://www.grafs.com/retail/catalog/category/categoryId/781?
Wow, that’s cheap! Can’t believe some are putting themselves through the aggravation of re-forming 38-55!
Oh yes it is….and I can’t remember the last time I saw .32-40 in stock anywhere other than Quality Cartridge for much more $. I’d act FAST on that & stock up!
Maybe .25-20 is next…
I bought a bag of 50 mid November from Graf’s. Checked a few days later to order some more and already out of stock. I was concerned about quality so only ordered 1 bag. Quality ok. Dumb! Hope Winchester makes another run.
November 7, 2015
Offline
Powder Valley had some in December. RCBS makes the dies in their Cowboy series, got a set from Midway. I reformed a few cases from older 38-55 cases but wasn’t very happy with the results. Probably would have been better after annealing or with newer brass.
Mike
I had a 94 chambered in 32-40, didn’t hang on too it but I did a bit of research on ammo. Guys seemed to be having good luck running 32 specials right through the full length die with good results. I can’t verify it, just tossing another idea out there……..
Erin
Yes, Powder Valley has Winchester 32-40 brass. I ordered a bag of 50 @ $36. The web site shows 10 left. Probably will go fast once the word gets out! They also have Hornady 25-35 brass. I bought 50 of those also for$32. Will seem nice using 32-40 loads that are actually stamped that on the head.
1 Guest(s)
