Winchester Collector - Forum: Winchester Rifles

Buck1967 on 1866 at Rock Island

Fri, 24 Apr 2026 00:16:21 +0000

Thanks Fellas! I think there are enough red flags here that I will pass on this one. I appreciate everyone’s advice and input!

oldcrankyyankee on Steve made me look!

Fri, 24 Apr 2026 00:08:26 +0000

As title says, Steve made me look. I am not know as an 1894 person, but they have entered my mind lately. Saw this one listed and curios what others think. A "eastern carbine" by all appearances, but a crescent butt? makes me wonder. It is outside the letterable range. and no I am not gunning for it, tax man took care of that for a while this year. just curios

https://reddingauction.com/item/187r-winchester-mod-1894-carbine-25-35-wcf-cal-lever-action-rifle/

steve004 on I'm not so sure about this Model 70 .303 British

Thu, 23 Apr 2026 22:51:27 +0000

https://reddingauction.com/item/101r-rare-possible-experimental-winchester-mod-70-transitional-pre-64-303-british-cal-bolt-action-rifle/

I don't think he locks it in with his Roger Rule reference.

And there is a 9x57:

https://reddingauction.com/item/100r-rare-winchester-mod-70-standard-pre-war-in-the-scarce-9mm-mauser-cal-bolt-action-rifle/

Assuming they cycled fine, I could see either of them working well for deep north woods deer hunting. Although at the moment, I can't get a Savage 99 .250-3000 off my mind for deer.

steve004 on Redding auction coming up - some in interesting rifles - WACA .257

Thu, 23 Apr 2026 22:31:47 +0000

Here's a WACA rifle:

https://reddingauction.com/item/12r-winchester-mod-70-xtr-featherweight-super-grade-winchester-arms-collectors-association-collectors-issue-special-edition-257-robe/

And on the topic of Savages (at least it's in a Winchester chambering) here's a barrel band carbine you don't see every day:

https://reddingauction.com/item/38r-savage-mod-99-h-carbine-no-ring-30-30-win-cal-lever-action-rifle/

And on the topic of .250-3000's here a very desirable .250 in a solid frame:

https://reddingauction.com/item/39r-savage-mod-99-eg-solid-frame-250-3000-sav-cal-lever-action-rifle/

Nice looking .22 Hornet:

https://reddingauction.com/item/61r-ruger-mod-no-1-international-mannlicher-22-hornet-cal-single-shot-falling-block-rifle/

On the newer side for me, but this .38-55 appeals to me. I do admire Ruger for all of their special chamberings:

https://reddingauction.com/item/1r-ruger-mod-no-1-s-38-55-win-cal-single-shot-rifle/

Fixed it - got the right link to the Hornet

1873man on New Member here

Thu, 23 Apr 2026 04:22:41 +0000

You have to control the amount of heat. Heating it until it changes color is not good. 250 degrees is a safe temperature for any steel. You can use a oven.

Bob

Pioneer on New Member here

Thu, 23 Apr 2026 03:58:55 +0000

Thank you guys for the big welcome and I appreciate your jumping in for the assistance. Think I'm gonna sleep on it and not just rush in at this point.

I'm pretty sure I don't want to apply any heat to it and risk taking any temper out of that lever link.

If anyone has alternative recommendations on how to remove seized lever pin, I'm all ears.

Thanks again - Joe

1873man on New Member here

Thu, 23 Apr 2026 03:47:08 +0000

The next step to get the pin out is heat the end and press it out. My guess it was sweated in. The pin is slightly bigger than the hole in the lever. You would heat the lever and cool the pin and press it together quickly. They probably had a jig that had a hole the correct depth so the pin could be pressed in to the right depth in one motion.

Bob

Pioneer on New Member here

Thu, 23 Apr 2026 02:10:48 +0000

I'm wrestling now with the idea of drilling that pin out (or press it out) and order a new one, verses spending what will likely be several hours filing and hoping they end up true enough round (unlikely) when I'm done, and possibly end up compromised structurally.

The things we do as a labor of love for these old rifles

Tedk on New Member here

Thu, 23 Apr 2026 02:09:09 +0000

Welcome to WACA Pioneer

Looks like you ‘id the problem

TR on 1866 at Rock Island

Thu, 23 Apr 2026 02:00:23 +0000

This gun is a perfect example why you have to search guns you intend to buy. In the picture 1873man posted you see the estimate, 27.5k-40k. This guns price estimates at auction are on a down hill slide big time. Two different descriptions for the same gun being sold by the same company, RIA. T/R

Pioneer on New Member here

Thu, 23 Apr 2026 01:56:25 +0000

Toggles don't look modern and I think are original, I figure hammer / mushroom effect.

I went ahead and took the lever back out of the gun and brought the lever and both toggles to my shop to do it right, in a vice.

Knocked mushroom off both ends of the pin and left a very shallow bevel with dremel, then started filing with fine diamond coated file.

The pins (.182) are still to big to go into the toggles (.145), so previous owner must have really took out some pinned up anger with that hammer.

I'm working them down slowly with the diamond file to end up with a nice smooth (and round) snug fit.

Wouldn't think someone hammering them even that much wouldn't fatten em up that bad, but I can't imagine why else the size mis-match, unless the toggles are indeed modern production... but they do look old to me.

TXGunNut on 1866 at Rock Island

Thu, 23 Apr 2026 01:26:07 +0000

The description seems to confirm what our experts are seeing, hard to say when the engraving was done but RIA does not describe it as factory engraving. In today's market it could bring a respectable price. OTOH didn't someone say that the brass guns have been a bit soft lately? Could be worth a watch.

Mike

Jeremy P on 1866 at Rock Island

Thu, 23 Apr 2026 01:22:03 +0000

Rick C said

Buck1967 said
https://www.rockislandauction.com/detail/5032/1/attractive-engraved-winchester-model-1866-lever-action-rifle
Hi guys, I’m thinking of adding a 66 to my collection and curious if you guys see anything wrong with this one? Appreciate any help! Thanks

RIA knows the routine. Their description “Fine as professionally embellished” says it all to me. Not the original engraving.

This. Add to that they only included 6 pictures on a gun that potentially could be worth north of 10k....plus as mentioned, it's not in a premier auction. Red flags and they know something we don't....or that we do I guess.

1873man on New Member here

Thu, 23 Apr 2026 01:08:32 +0000

I have never had a issue with the toggle not fitting on the lever pin. Are the toggles a repo set? Did the pin get mushroomed trying to hammer it out?

Bob

Pioneer on New Member here

Thu, 23 Apr 2026 00:56:05 +0000

Yep, lessons learned. This is actually the first '73 I've ever taken apart, only because I had to in order to fix the problem.

The lever "catch" lines up properly now to hold the lever in place, and I was smiling.

HOWEVER, if I was smart I would have "fit checked" the toggle links to the replacement lever pin, as I mentioned the pin is seized in that one too.

So low and behold I got the lower tang, lever, etc lined up and button down, the lever spring reinstalled then went to attach the toggles.

You would have probably seen this coming but I didn't... side toggles will not slip onto the (also seized) pin of this replacement finger lever. My luck.

Guess the guy before me figured it was hammer time as well. I believe a couple light passes with my dremel tool can resolve that quickly unless you know of a better option?

Check fit to the remaining pieces before re-assembling... another lesson learned .