<?xml version="1.0" encoding="UTF-8"?><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
	    <channel>
        <title>Winchester Collector - Forum: Winchester Rifles</title>
        <link>https://winchestercollector.org/forum/winchester-rifles/</link>
        <description><![CDATA[Official Site of the Winchester Arms Collectors Association]]></description>
        <generator>Simple:Press Version 6.11.14</generator>
        <atom:link href="https://winchestercollector.org/forum/winchester-rifles/rss/" rel="self" type="application/rss+xml"/>
		                <item>
                    <title>1892takedown on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186865</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186865</guid>
					                        <description><![CDATA[<p>If you have a tubular magazine you have to crimp.  Just saying there seem to get a little flare in the brass at the crimp that will add a couple thousandths of an inch difference at the neck.  Even trying to adjust to the slightest crimp still seems to create a little flare in the brass.  </p>
<p>I have no experience loading for non-Winchester mfg., non-1894 guns.  Just gonna have to experiment a little. </p>
<p>Chris</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 16:10:03 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186864</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186864</guid>
					                        <description><![CDATA[<p>Good advice!  I'll give it a try this morning and report back. Chris, when you say "the slightest crimp used will still flare the brass at the neck, no matter how slight" -- are you saying I should avoid crimping?</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 15:38:01 +0000</pubDate>
                </item>
				                <item>
                    <title>Anthony #5411 on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186861</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186861</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>1873man said </strong><br />
When I buy a gun, I want to see the grime packed into the corners and around the screws. Its a seal of originality and when I don't see it I wonder what did someone do to it, did someone swap the barrel, line it or change the forearm wood so I look closer at the gun to try to figure out what they did. The only thing you really need to do is clean and lube the action if it feels gritty if your shooting it. Now if your doing cowboy action shooting then thats different and your not normally using nice collectable guns for that.  But its up to the owner, its their gun and can do what they want to it. <br />
Bob<br />
  </p>
</blockquote>
<p>Well said Bob!</p>
<p>Tony</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 15:23:07 +0000</pubDate>
                </item>
				                <item>
                    <title>1873man on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186858</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186858</guid>
					                        <description><![CDATA[<p>When I buy a gun, I want to see the grime packed into the corners and around the screws. Its a seal of originality and when I don't see it I wonder what did someone do to it, did someone swap the barrel, line it or change the forearm wood so I look closer at the gun to try to figure out what they did. The only thing you really need to do is clean and lube the action if it feels gritty if your shooting it. Now if your doing cowboy action shooting then thats different and your not normally using nice collectable guns for that.  But its up to the owner, its their gun and can do what they want to it. </p>
<p>Bob</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 15:10:16 +0000</pubDate>
                </item>
				                <item>
                    <title>Anthony #5411 on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186856</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186856</guid>
					                        <description><![CDATA[<blockquote>
<blockquote class="spPostEmbedQuote">
<p><strong>Chuck said </strong><br />
Like Bob said, " it’s easy to scratch the finish and disturb the grime that seals the mag tube to the rest of the gun".  Take it slow and lube the magazine tube rings on each side and move it a fraction of an inch and clean it again.  Move it back and forth cleaning as you go.  If you don't get all of the grit removed you Will scratch the tube.    <br />
How many takedown mag tubes have you seen that have that swirl mark because they didn't clean the tube ring. <br />
  </p>
</blockquote>
<p>Great advice also Chuck, as Bob's point is also well taken, as to why I only take apart the ones necessary, and have issues, not the ones that are 100%, correct. IMO!</p>
</blockquote>
<blockquote>
<p>As I am in full agreement with you!</p>
</blockquote>
<blockquote class="spPostEmbedQuote">
<p><strong>86Win said </strong><br />
Tony, with the help of a loupe I found the periods to be just punch marks<br />
Don.<br />
  </p>
</blockquote>
<p>Sounds right. Thanks Don.</p>
<p>Tony</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 14:50:16 +0000</pubDate>
                </item>
				                <item>
                    <title>Dave M. on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186854</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186854</guid>
					                        <description><![CDATA[<p>I agree with 1892takedown.</p>
<p>I do the same thing in order to chamber the Starline long brass, when loaded with a .381 LFPGC bullet. In my 1894 Commemorative with .379 groove dia.</p>
<p>It doesn't take much, just a touch.</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 11:22:48 +0000</pubDate>
                </item>
				                <item>
                    <title>1892takedown on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186852</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186852</guid>
					                        <description><![CDATA[<p>Before you resort to honing or any of that, try taking the decapping pin out of your sizing die and run the loaded cartridge (lubed) into the sizing die till you first feel resistance then give your lever a slight little bump (nothing drastic, ever so slight), this will compress the crimp/neck just enough to likely make a difference.  Then try chambering.  The slightest crimp used will still flare the brass at the neck = larger neck diameter however so slight. </p>
<p>When I load for the 38-55, my case necks are 0.395 or thereabouts (sized cast bullet at .380 using Starline brass, brass trimmed to 2.105", OACL 2.515") when seated, by doing that extra slight step the neck diameter will be normally be reduced to 0.391 to 0.392 which will allow chambering.  0.392' is the largest neck diameter that will chamber in the 1894 38-55, so Ive found.  May be worth a try and takes little effort.  </p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 06:58:32 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186851</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186851</guid>
					                        <description><![CDATA[<p>I recently bought a very handsome Winchester Model 1885 chambered in 38-55 Ballard/Winchester, one from the Limited Edition series made in 2004 by Miroku for Browning. I have no intention of buying a $90 box of current factory ammunition or shooting jacketed bullets. Instead. I bought a Redding three die set and an additional Redding competition seating die. A quantity of new Winchester brass and some new Starline brass, plus a box of Lightning 245 grain cast lead bullets sized to .378. </p>
<p>I was forewarned about the modern SAAMI specification mismatch of a small chamber neck to a large groove diameter barrel, whereby a bullet sized big enough to seal the bore will, when seated in a case, result in a cartridge with a neck too fat to chamber in a rifle cut to SAAMI minimum chamber neck/mouth dimensions. </p>
<p>THE ROOT OF THE PROBLEM:  Winchester sells factory 38-55 ammunition loaded with .3775 nominal diameter ( reportedly closer to .3665 ) thin jacketed PowerPoint bullets, which can swage down and be shot accurately in Miroku .375  bore diameter barrels with .376 ~ .377 grooves. </p>
<p>And Miroku 38-55 chambers are cut to the SAAMI minimum diameter of .394, ignoring the SAAMI permitted manufacturing tolerance of +.002. At least mine is, as I empirically proved today.  A dummy cartridge I made up using the allegedly thinner neck walled Starline brass and seating the Lightning 245 grain .378 bullet to its crimping groove, was too fat in the neck to chamber. The neck miked .395. Let BT = brass thickness at the neck, PD = bullet diameter, and CND = cartridge neck diameter. If CND = 2(BT) + PD  and CND = .395 and PD = .378  then</p>
<p>(CND - PD)/2 = BT = .0085</p>
<p>When I say it wouldn't chamber, I mean it stuck tight well before the base and head of the case could clear the forward edge of the rising bolt. The cartridge had to be pushed loose and out of the chamber by a cleaning rod inserted down the bore. </p>
<p>My dial indicator actually reads the Starline brass thickness at the neck as .010, the same as my particular lot of Winchester brass. Despite Starline's advertising its 38-55 brass is only .007 to .0075 at the neck, to help with the mismatch.  Maybe that is why Graf's put these two bags of it on sale! </p>
<p>If the brass had been, say .0075 instead of .0085, then the assembled cartridge would still have been .378 + .015 = .393,  which is iffy in a .394 chamber. SAAMI specs call for not less than .002 clearance. For comparison, most manufacturers of 30/06 ammunition size assembled cartridge necks for .006 clearance in SAAMI rifle chambers.  </p>
<p>Bert has suggested honing the chamber neck to increase diameter by .015, which would open it to .409.  The more I consider it, the better I like the idea.  I've emailed Ron and put the matter in front of him.  </p>
<p>I have the distinct impression Browning didn't think people who bought these rifles in 38-55 would actually shoot them, or, they did, it would be with Winchester commercial ammunition. Well, one way or another, this one is going to shoot cast lead as JMB intended.  <img data-upload="1" data-width="3024" data-height="4032" title="20261115_195037.jpg" alt="20261115_195037.jpg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/20261115_195037.jpg" /><img data-upload="1" data-width="4032" data-height="3024" title="20261110_093828-1.jpg" alt="20261110_093828-1.jpg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/20261110_093828-1.jpg" /><img data-upload="1" data-width="1000" data-height="1333" title="pix298433301.jpeg" alt="pix298433301.jpeg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/pix298433301.jpeg" /><img data-upload="1" data-width="1000" data-height="1333" title="pix242588614.jpeg" alt="pix242588614.jpeg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/pix242588614.jpeg" /></p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 04:55:49 +0000</pubDate>
                </item>
				                <item>
                    <title>sb on Winchester Model 71 Drooping Lever</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/winchester-model-71-drooping-lever/#p186847</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/winchester-model-71-drooping-lever/#p186847</guid>
					                        <description><![CDATA[<p>I’ve had a couple 71s with this problem.  As memory serves me, both guns had problems with the plunger on the lever  that snaps into the receiver bottom.  One was stuck and wouldn’t move and the other had a small chip out of the receiver bottom where that pin engages.  </p>
<p>I don’t know what’s wrong with yours obviously but I’d start there</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 03:22:47 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on The Doc Pardee Club, still looking for....</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/#p186846</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/#p186846</guid>
					                        <description><![CDATA[<p>Not surprised the gents over on the Cast Boolit Forum are doing well in your contest. John Kort taught them well and his students are still passing along his wisdom. I think he's smiling down on them from Heaven's Range. John is one of the gentlemen who told me about WACA. Please don't hold it against him! He was a good man who truly understood cast bullets and old Winchesters. John was very articulate and generous is sharing his knowledge. </p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 03:18:13 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Just an observation . . .</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/just-an-observation/page-2/#p186840</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/just-an-observation/page-2/#p186840</guid>
					                        <description><![CDATA[<p>Because I'm not a subsistence hunter, I decided after the incident I related that I would decline shots at moving deer. It was bad enough to prolong an animal's anguish. Losing one would be worse and I just don't need the meat or the rack bad enough to justify the risk. I fully understand life in the wild often means a bad, painful death for game amimals but I'm not a cougar or a coyote and have choices they don't. Not preaching to anybody; it's just a personal choice, not a moral judgement. </p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 00:47:29 +0000</pubDate>
                </item>
				                <item>
                    <title>Bert H. on Expertise on the earlier 1886</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186838</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186838</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p>
<strong><a href="mailto:delipp_42@msn.com" target="_blank">delipp_42@msn.com</a> said </strong><br />
I recently inherited a model 1886 serial #13800 chambered in 38-56 WCF. The gun is in very good original condition. The bore slugs .380. I want to make some smokeless ammo for it but the load data I have found seems geared towards newer 1886 rifles built with improved steel. I have read that Winchester changed the steel of this model starting with serial #126,000 (Gunsmithing Simplified by Harold MacFarland copyright 1950). Does anyone know where I can get safe smokeless load data for a 38-56 this old?<br />
  </p>
</blockquote>
<p>Winchester did not change the steel used for the Model 1886 receiver frames.  In 1902 (with the introduction of the 33 WCF cartridge), Nickel Steel barrels were standard for the 33 WCF, and optional for the original black powder cartridges.  In the year 1926, Winchester offered Stainless Steels barrels as an extra cost special order item.</p>
<p>Now, have stated that, the 38-56 WCF can be safely loaded with specific types of smokeless powder for any original Mode 1886 rifle that is in sound mechanical condition.  My go to smokeless powder would be IMR 4198 or H4198.</p>
<p>Bert</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 00:25:04 +0000</pubDate>
                </item>
				                <item>
                    <title>delipp_42@msn.com on Expertise on the earlier 1886</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186833</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186833</guid>
					                        <description><![CDATA[<p>I recently inherited a model 1886 serial #13800 chambered in 38-56 WCF. The gun is in very good original condition. The bore slugs .380. I want to make some smokeless ammo for it but the load data I have found seems geared towards newer 1886 rifles built with improved steel. I have read that Winchester changed the steel of this model starting with serial #126,000 (Gunsmithing Simplified by Harold MacFarland copyright 1950). Does anyone know where I can get safe smokeless load data for a 38-56 this old?</p>
]]></description>
					                    <pubDate>Mon, 16 Nov 2026 22:09:38 +0000</pubDate>
                </item>
				                <item>
                    <title>86Win on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186830</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186830</guid>
					                        <description><![CDATA[<p>Tony, with the help of a loupe I found the periods to be just punch marks</p>
<p>Don.</p>
]]></description>
					                    <pubDate>Mon, 16 Nov 2026 20:27:57 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186820</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186820</guid>
					                        <description><![CDATA[<p>Like Bob said, " it’s easy to scratch the finish and disturb the grime that seals the mag tube to the rest of the gun".  Take it slow and lube the magazine tube rings on each side and move it a fraction of an inch and clean it again.  Move it back and forth cleaning as you go.  If you don't get all of the grit removed you Will scratch the tube.    </p>
<p>How many takedown mag tubes have you seen that have that swirl mark because they didn't clean the tube ring. </p>
]]></description>
					                    <pubDate>Mon, 16 Nov 2026 15:55:00 +0000</pubDate>
                </item>
				    </channel>
	</rss>
