opposite side of grip and a poor pic of the bottom side

Tony

Bert

I personally do not believe the checkering on the pistol grip is factory original.

Bert

antler1 said
So has the new NFA ruling on SBR exempt all trapper model's from the BATF regarding firearms under 16 inches and would the BATF exemption be required to purchase a SBR trapper acquired before the recent NFA ruling? 
  

Pat,

At this time, there is No possible way to predict what the full impact of that ruling will be.   However, the ruling does appear to make it a strong possibility that getting a BATF clearance letter for a SBR or SBS will become a thing of the past.  For now, I strongly advise keeping any BATF clearance letters you have, and definitely hold off on sending any new requests to the BATF.

Bert

Tony

For simplicity, let's confine the discussion to the period from the inception of WRA through 1980.

American Black Walnut, jugens negra, was always the standard material for stocks and forearms, although not always available in the quantities required and with enormous variations in color and grain, largely depending whether the blank was mostly heartwood or sapwood and, to a lesser extent, from what part of the country the tree came from. 

When Black Walnut ran short,  wood from the sweetgum tree, liquidambar styraflua, was substituted, which is structurally suitable but uninteresting, and sometimes other species. 

For fancy wood with extra color and grain, the stumps of Black Walnut were favored and reserved. In the British gunmaking business, fancy English Walnut a/k/a French or Circassian Walnut blank is often admiringly called "a hunk of stump." 

While the difference in species yields great variations in the color of the raw wood, how it is finished and with what makes a huge difference. 

Black Walnut can be very coarse-grained and porous and Winchester routinely used a black material to fill the pores. All the specks and splots of black are not original wood. 

The red-brown color of Winchester wood came from an alcohol based dye sprayed on to homogenize the different colors of the wood within a raw blank, which could range from Palamino blond to green to Ebony black. Owmers who elect to refinish an old Winchester stock are sometimes shocked when they remove the old finish. 

Oil finishes turn dark with years of exposure to the Sun, whether linseed oil or tung oil or some other variety. Add enough drying and curing agents to the oil and it is called varnish. It will degrade too but it takes longer. 

But for the most part, Winchester's standard topcoat was not varnish but clear sprayed lacquer because it was quicker and looked nice until it started flaking and peeling. Lacquer is not very resistant to water.it can be helped by wiping on Tru-Oil or boiled linseed oil and rubbing off the excess. 

Toward the end of ownership by Olin, modern urethane varnishes began to be employed, certainly by 1964 although some say sooner. Oil based urethane varnish is warm toned, hard and durable. It is not easily touched up or removed.