<?xml version="1.0" encoding="UTF-8"?><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
	    <channel>
        <title>Winchester Collector - Forum: Winchester Rifles</title>
        <link>https://winchestercollector.org/forum/winchester-rifles/</link>
        <description><![CDATA[Official Site of the Winchester Arms Collectors Association]]></description>
        <generator>Simple:Press Version 6.11.14</generator>
        <atom:link href="https://winchestercollector.org/forum/winchester-rifles/rss/" rel="self" type="application/rss+xml"/>
		                <item>
                    <title>Dave M. on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186854</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186854</guid>
					                        <description><![CDATA[<p>I agree with 1892takedown.</p>
<p>I do the same thing in order to chamber the Starline long brass, when loaded with a .381 LFPGC bullet. In my 1894 Commemorative with .379 groove dia.</p>
<p>It doesn't take much, just a touch.</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 11:22:48 +0000</pubDate>
                </item>
				                <item>
                    <title>1892takedown on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186852</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186852</guid>
					                        <description><![CDATA[<p>Before you resort to honing or any of that, try taking the decapping pin out of your sizing die and run the loaded cartridge (lubed) into the sizing die till you first feel resistance then give your lever a slight little bump (nothing drastic, ever so slight), this will compress the crimp/neck just enough to likely make a difference.  Then try chambering.  The slightest crimp used will still flare the brass at the neck = larger neck diameter however so slight. </p>
<p>When I load for the 38-55, my case necks are 0.395 or thereabouts (sized cast bullet at .380 using Starline brass, brass trimmed to 2.105", OACL 2.515") when seated, by doing that extra slight step the neck diameter will be normally be reduced to 0.391 to 0.392 which will allow chambering.  0.392' is the largest neck diameter that will chamber in the 1894 38-55, so Ive found.  May be worth a try and takes little effort.  </p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 06:58:32 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186851</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186851</guid>
					                        <description><![CDATA[<p>I recently bought a very handsome Winchester Model 1885 chambered in 38-55 Ballard/Winchester, one from the Limited Edition series made in 2004 by Miroku for Browning. I have no intention of buying a $90 box of current factory ammunition or shooting jacketed bullets. Instead. I bought a Redding three die set and an additional Redding competition seating die. A quantity of new Winchester brass and some new Starline brass, plus a box of Lightning 245 grain cast lead bullets sized to .378. </p>
<p>I was forewarned about the modern SAAMI specification mismatch of a small chamber neck to a large groove diameter barrel, whereby a bullet sized big enough to seal the bore will, when seated in a case, result in a cartridge with a neck too fat to chamber in a rifle cut to SAAMI minimum chamber neck/mouth dimensions. </p>
<p>THE ROOT OF THE PROBLEM:  Winchester sells factory 38-55 ammunition loaded with .3775 nominal diameter ( reportedly closer to .3665 ) thin jacketed PowerPoint bullets, which can swage down and be shot accurately in Miroku .375  bore diameter barrels with .376 ~ .377 grooves. </p>
<p>And Miroku 38-55 chambers are cut to the SAAMI minimum diameter of .394, ignoring the SAAMI permitted manufacturing tolerance of +.002. At least mine is, as I empirically proved today.  A dummy cartridge I made up using the allegedly thinner neck walled Starline brass and seating the Lightning 245 grain .378 bullet to its crimping groove, was too fat in the neck to chamber. The neck miked .395. Let BT = brass thickness at the neck, PD = bullet diameter, and CND = cartridge neck diameter. If CND = 2(BT) + PD  and CND = .395 and PD =   then</p>
<p>(CND - PD)/2 = BT = .0085</p>
<p>When I say it wouldn't chamber, I mean it stuck tight well before the base and head of the case could clear the forward edge of the rising bolt. The cartridge had to be pushed loose and out of the chamber by a cleaning rod inserted down the bore. </p>
<p>My dial indicator actually reads the Starline brass thickness at the neck as .010, the same as my particular lot of Winchester brass. Despite Starline's advertising its 38-55 brass is only .007 to .0075 at the neck, to help with the mismatch.  Maybe that is why Graf's put these two bags of it on sale! </p>
<p>If the brass had been, say .0075 instead of .0085, then the assembled cartridge would still have been .378 + .015 = .393,  which is iffy in a .394 chamber. SAAMI specs call for not less than .002 clearance. For comparison, most manufacturers of 30/06 ammunition size assembled cartridge necks for .006 clearance in SAAMI rifle chambers.  </p>
<p>Bert has suggested honing the chamber neck to increase diameter by .015, which would open it to .409.  The more I consider it, the better I like the idea.  I've emailed Ron and put the matter in front of him.  </p>
<p>I have the distinct impression Browning didn't think people who bought these rifles in 38-55 would actually shoot them, or, they did, it would be with Winchester commercial ammunition. Well, one way or another, this one is going to shoot cast lead as JMB intended.  <img data-upload="1" data-width="3024" data-height="4032" title="20261115_195037.jpg" alt="20261115_195037.jpg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/20261115_195037.jpg" /><img data-upload="1" data-width="4032" data-height="3024" title="20261110_093828-1.jpg" alt="20261110_093828-1.jpg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/20261110_093828-1.jpg" /><img data-upload="1" data-width="1000" data-height="1333" title="pix298433301.jpeg" alt="pix298433301.jpeg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/pix298433301.jpeg" /><img data-upload="1" data-width="1000" data-height="1333" title="pix242588614.jpeg" alt="pix242588614.jpeg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/zebulon/2026/11/pix242588614.jpeg" /></p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 04:55:49 +0000</pubDate>
                </item>
				                <item>
                    <title>sb on Winchester Model 71 Drooping Lever</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/winchester-model-71-drooping-lever/#p186847</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/winchester-model-71-drooping-lever/#p186847</guid>
					                        <description><![CDATA[<p>I’ve had a couple 71s with this problem.  As memory serves me, both guns had problems with the plunger on the lever  that snaps into the receiver bottom.  One was stuck and wouldn’t move and the other had a small chip out of the receiver bottom where that pin engages.  </p>
<p>I don’t know what’s wrong with yours obviously but I’d start there</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 03:22:47 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on The Doc Pardee Club, still looking for....</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/#p186846</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/#p186846</guid>
					                        <description><![CDATA[<p>Not surprised the gents over on the Cast Boolit Forum are doing well in your contest. John Kort taught them well and his students are still passing along his wisdom. I think he's smiling down on them from Heaven's Range. John is one of the gentlemen who told me about WACA. Please don't hold it against him! He was a good man who truly understood cast bullets and old Winchesters. John was very articulate and generous is sharing his knowledge. </p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 03:18:13 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Just an observation . . .</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/just-an-observation/page-2/#p186840</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/just-an-observation/page-2/#p186840</guid>
					                        <description><![CDATA[<p>Because I'm not a subsistence hunter, I decided after the incident I related that I would decline shots at moving deer. It was bad enough to prolong an animal's anguish. Losing one would be worse and I just don't need the meat or the rack bad enough to justify the risk. I fully understand life in the wild often means a bad, painful death for game amimals but I'm not a cougar or a coyote and have choices they don't. Not preaching to anybody; it's just a personal choice, not a moral judgement. </p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 00:47:29 +0000</pubDate>
                </item>
				                <item>
                    <title>Bert H. on Expertise on the earlier 1886</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186838</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186838</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p>
<strong><a href="mailto:delipp_42@msn.com" target="_blank">delipp_42@msn.com</a> said </strong><br />
I recently inherited a model 1886 serial #13800 chambered in 38-56 WCF. The gun is in very good original condition. The bore slugs .380. I want to make some smokeless ammo for it but the load data I have found seems geared towards newer 1886 rifles built with improved steel. I have read that Winchester changed the steel of this model starting with serial #126,000 (Gunsmithing Simplified by Harold MacFarland copyright 1950). Does anyone know where I can get safe smokeless load data for a 38-56 this old?<br />
  </p>
</blockquote>
<p>Winchester did not change the steel used for the Model 1886 receiver frames.  In 1902 (with the introduction of the 33 WCF cartridge), Nickel Steel barrels were standard for the 33 WCF, and optional for the original black powder cartridges.  In the year 1926, Winchester offered Stainless Steels barrels as an extra cost special order item.</p>
<p>Now, have stated that, the 38-56 WCF can be safely loaded with specific types of smokeless powder for any original Mode 1886 rifle that is in sound mechanical condition.  My go to smokeless powder would be IMR 4198 or H4198.</p>
<p>Bert</p>
]]></description>
					                    <pubDate>Tue, 17 Nov 2026 00:25:04 +0000</pubDate>
                </item>
				                <item>
                    <title>delipp_42@msn.com on Expertise on the earlier 1886</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186833</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/expertise-on-the-earlier-1886/#p186833</guid>
					                        <description><![CDATA[<p>I recently inherited a model 1886 serial #13800 chambered in 38-56 WCF. The gun is in very good original condition. The bore slugs .380. I want to make some smokeless ammo for it but the load data I have found seems geared towards newer 1886 rifles built with improved steel. I have read that Winchester changed the steel of this model starting with serial #126,000 (Gunsmithing Simplified by Harold MacFarland copyright 1950). Does anyone know where I can get safe smokeless load data for a 38-56 this old?</p>
]]></description>
					                    <pubDate>Mon, 16 Nov 2026 22:09:38 +0000</pubDate>
                </item>
				                <item>
                    <title>86Win on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186830</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186830</guid>
					                        <description><![CDATA[<p>Tony, with the help of a loupe I found the periods to be just punch marks</p>
<p>Don.</p>
]]></description>
					                    <pubDate>Mon, 16 Nov 2026 20:27:57 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186820</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186820</guid>
					                        <description><![CDATA[<p>Like Bob said, " it’s easy to scratch the finish and disturb the grime that seals the mag tube to the rest of the gun".  Take it slow and lube the magazine tube rings on each side and move it a fraction of an inch and clean it again.  Move it back and forth cleaning as you go.  If you don't get all of the grit removed you Will scratch the tube.    </p>
<p>How many takedown mag tubes have you seen that have that swirl mark because they didn't clean the tube ring. </p>
]]></description>
					                    <pubDate>Mon, 16 Nov 2026 15:55:00 +0000</pubDate>
                </item>
				                <item>
                    <title>Anthony #5411 on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186819</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186819</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>1873man said </strong><br />
Looking under barrels is a little invasive since it’s easy to scratch the finish and disturb the grime that seals the mag tube to the rest of the gun which makes a gun that has never been messed with look to one that has so I don’t like to do it. Trying to figure out what the A.E. means is not going to be easy unless you find more occurrences of it or if its found in other models but to me with the periods after the letters  it is probably initials of someone. The stamp looks to be a single stamp not individual stamps and the periods are square which is seen in early stamps.<br />
Bob<br />
  </p>
</blockquote>
<p>Bob,</p>
<p>I've always felt the same thing and in the same way, as far as looking under the barrels goes. Until I retired e few years ago and had more time for our hobby and got into things a little more. Reading and learning is a wonderful thing, especially for us in this great hobby of ours. I'm also in agreement with you on taking great care to secure and carefully tighten the piece down properly, before doing so. So much as to over protect and go extremely slow in removing the for end, end cap, etc.....Heavy towels, smaller cloths, and some tape as needed being careful not to leave tape residue, in unwanted areas also. Knowing what chemicals have in them and avoiding the many that will do more harm out there than help us is also important, as is the proper screw driver set or sets as we've often spoken of this also. The all important drop of KROIL, ahead of time on screws, helps out tremendously! Always remembering to get comfortable when using the screwdriver and making sure of the right bit selection, as one scratch, can be detrimental, to these fine pieces also.</p>
<p>I'm glad that you noticed the square periods after the initials, as I missed those. Good catch as a very important point, also. The A.E. sure seems and looks to be from someone's initials as an old inspection mark of some kind.</p>
<p>Don,</p>
<p>You're pictures are a little hard for me to see, but you're explanation of what you found are certainly helpful. The post above that I copied, from Bob, explains a little more on the "123", as it was used and seen a lot during that era. The " 996 L. C. ", stamp is new to me, but I am no expert, and maybe Bob can shed some light on it for us. As it's hard to see, are the periods after the, L and the, C round? I'm guessing they are. (From trying to see them). </p>
<p>Tony</p>
]]></description>
					                    <pubDate>Mon, 16 Nov 2026 15:31:30 +0000</pubDate>
                </item>
				                <item>
                    <title>Bryan Austin on The Doc Pardee Club, still looking for....</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/#p186805</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/#p186805</guid>
					                        <description><![CDATA[<p>CONGRATULATIONS to Porpoise/Rutts!!!!!!</p>
<p>30 Consecutive shots inside 4"</p>
<p>3.45" Group to be exact!!!</p>
<p><img alt="" src="https://www.gunboards.com/attachments/fe84c466-a058-4777-9aab-6e279c03786a-jpg.4524761/?auto=webp&amp;fit=bounds&amp;format=pjpg&amp;height=1920&amp;optimize=high&amp;width=1920" width="515" height="679" /></p>
]]></description>
					                    <pubDate>Sun, 15 Nov 2026 22:41:37 +0000</pubDate>
                </item>
				                <item>
                    <title>86Win on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186804</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/#p186804</guid>
					                        <description><![CDATA[<p>Regarding 1873 proof marks. I decided to examine the underside of the barrel on my 1873 SN 148996 A. Lower left side barrel at 8:00 position is stamped 996 L. C.  Lower left side of barrell at 7:00  position is  VP in oval.  Lower side of barrel at receiver is stamped L23 (old typewriters used L for 1) On the front face of receiver right side  is an upside down capital P. This rifle is a 38-cal with a  24" round barrel and full magazine. Attached are some poor quality photos. I will leave it disassembled for a couple of days if questio<img data-upload="1" data-width="640" data-height="480" title="P1050297.JPG" alt="P1050297.JPG" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/86win/2026/11/P1050297.JPG" /><img data-upload="1" data-width="640" data-height="480" title="P1050295.JPG" alt="P1050295.JPG" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/86win/2026/11/P1050295.JPG" /><img data-upload="1" data-width="640" data-height="480" title="P1050296.JPG" alt="P1050296.JPG" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/86win/2026/11/P1050296.JPG" /><img data-upload="1" data-width="640" data-height="480" title="P1050291.JPG" alt="P1050291.JPG" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/86win/2026/11/P1050291.JPG" /><img data-upload="1" data-width="640" data-height="480" title="P1050287.JPG" alt="P1050287.JPG" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/86win/2026/11/P1050287.JPG" /><img data-upload="1" data-width="640" data-height="480" title="P1050285.JPG" alt="P1050285.JPG" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/86win/2026/11/P1050285.JPG" />ns                               </p>
]]></description>
					                    <pubDate>Sun, 15 Nov 2026 22:22:03 +0000</pubDate>
                </item>
				                <item>
                    <title>epoletna on Prewar 1937 Model 70 22 Hornet Carbine - bird in hand!</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/prewar-1937-model-70-22-hornet-carbine-bird-in-hand/#p186798</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/prewar-1937-model-70-22-hornet-carbine-bird-in-hand/#p186798</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p>
<strong>epoletna said </strong><br />
Edward:  I agree about needing to make a shorter action for short cartridges in the M70.  My M43 in .218 Bee has a trigger that is shameful.  Sure wish I could put an aftermarket trigger on it.  <br />
  </p>
</blockquote>
<blockquote class="spPostEmbedQuote">
<p>
<strong>Bert H. said </strong></p>
<blockquote class="spPostEmbedQuote">
<p>
epoletna said<br />
Edward:  I agree about needing to make a shorter action for short cartridges in the M70.  My M43 in .218 Bee has a trigger that is shameful.  Sure wish I could put an aftermarket trigger on it.  <br />
  </p>
</blockquote>
<p>Have you tried adjusting the trigger in your Model 43?  The trigger in my Model 43 Hornet became much more mangagable after I used the adjustment  screw to reduce the pull tension.<br />
Bert<br />
  </p>
</blockquote>
<p>Bert:  I have tried to adjust the trigger, to no avail.  BTW, the provenance on your K-Hornet is outstanding!  Thank you for sharing.  Fred</p>
]]></description>
					                    <pubDate>Sun, 15 Nov 2026 20:47:26 +0000</pubDate>
                </item>
				                <item>
                    <title>Bert H. on Winchester Model 71 Drooping Lever</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/winchester-model-71-drooping-lever/#p186796</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/winchester-model-71-drooping-lever/#p186796</guid>
					                        <description><![CDATA[<p>It is not possible to diagnose a mechanical issue sight unseen.</p>
<p>Bert</p>
]]></description>
					                    <pubDate>Sun, 15 Nov 2026 17:26:40 +0000</pubDate>
                </item>
				    </channel>
	</rss>
