<?xml version="1.0" encoding="UTF-8"?><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
	    <channel>
        <title>Winchester Collector - Forum: Winchester Rifles</title>
        <link>https://winchestercollector.org/forum/winchester-rifles/</link>
        <description><![CDATA[Official Site of the Winchester Arms Collectors Association]]></description>
        <generator>Simple:Press Version 6.11.14</generator>
        <atom:link href="https://winchestercollector.org/forum/winchester-rifles/rss/" rel="self" type="application/rss+xml"/>
		                <item>
                    <title>1892takedown on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186934</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186934</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p>
<strong>TXGunNut said </strong><br />
It may be one of those "I've always done it this way" things but it seems I'm just following the conventional reloading wisdom that has served me well.  <br />
 <br />
Mike<br />
  </p>
</blockquote>
<p>That about sums it up nicely.  If aint broke dont fix it.  </p>
<p>What about trying a lead bullet with gas check??</p>
<p>I was measuring some bullets I cast from an original 1894 mould (cant remember which date) and they drop at 0.375".  Havent tried it but sure that wont work very well, maybe not even with BP, in a 0.380" bore.  It will probably chamber easily without extra steps but feel that it will rattle around down the bore. </p>
<p>Ive slugged and measured about 15-20 38-55 bores, from early in production (10,000 SN) on to past 1 MM serial, and they have all been at 0.3795" to 0.380".  </p>
]]></description>
					                    <pubDate>Thu, 19 Nov 2026 02:21:45 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186933</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186933</guid>
					                        <description><![CDATA[<p>Well, as they used to holler over at the other forum, "<em>Quod Erat Demonstrandum."  </em>Thus have I proved that buying a 38-55 will make you crazy. </p>
<p>I am, as I write, seaching for whereinhell I put my ancient powder dribbler and cord for my digital scale. Yes, we are about to assemble ammunition and will soon see what this rice-powered 1885 can do on paper. </p>
<p>If I can find my ##=/&#038;_ stuff. </p>
]]></description>
					                    <pubDate>Thu, 19 Nov 2026 02:11:05 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186932</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186932</guid>
					                        <description><![CDATA[<p>I think you're working with a very similar set of bore and chamber dimensions as I, Chris. When loading the 38-55 and 45-70 I only size the brass enough to give me the desired neck tension. I find the bulge in the case at the base of the bullet unsightly and suspect it affects case capacity and may deform the bullet. Not really a consideration with smokeless powder but I suspect it also works the brass unnecessarily. My crimp for the 38-55 is moderate at best and the short trip inside the sizing die may indeed negate it. I just feel better when the mouth of the case digs into the bullet a little bit. I've never had a bullet push back in the case and quite honestly with my hunting loads it probably wouldn't be a problem unless it went in so far it wouldn't feed. It may be one of those "I've always done it this way" things but it seems I'm just following the conventional reloading wisdom that has served me well. </p>
<p>I'd like to figure out a way to get maximum performance from Zeb's rifle but with the chamber, bore and component dimensions the math ain't mathin'. In its original BP configuration and rifles I suspect this round had very little neck tension or tight chamber issues, especially when the chamber was cut for a paper patch bullet. The mystery is why the chamber appears to be too tight in the vintage Winchester and the more modern Browning rifles. I've tried soft 20-1 lead bullets sized .377 but my smokeless loads won't bump them up to obturate to the .380 bore. I suspect Zeb's rifle may perform best using a J-word bullet with a thin jacket and pure lead core but I applaud his desire to use a lead bullet.</p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Thu, 19 Nov 2026 01:53:29 +0000</pubDate>
                </item>
				                <item>
                    <title>1892takedown on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186930</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186930</guid>
					                        <description><![CDATA[<p>Not necessarily disagree with anyone, or perceived expert reloader status, just making an observation for consideration/discussion;  I was measuring some of my loaded 38-55 cartridges, using 0.380" cast bullet with Starline Brass, and the neck diameter varies from 0.391-0.392 when compressing the cartridge neck in the sizing die as discussed above.  Is there also a secondary effect in bullet alignment??  The loaded cartridge measures with a diameter at the base of the bullet at 0.395", then below the bullet it is 0.390".  With the brass compressed against the bullet at and slightly below the neck, the brass below the bullet is restricted in diameter by 0.005", forming a constriction in the case diameter upon the effect of stretching of the sized brass upon seating the bullet.  Maybe a crimp wouldnt be needed for tubular magazine in this scenario??  Never tried it, but when you got something that works, at least for me, why tinker with it.  </p>
<p>Not saying this may or does not apply to other cartridges, not claiming so, but with the 38-55 (1894) where cartridge/bullet diameters and chamber/bore diameter are concerned, it makes loading for it a bit different from other cartridges, IMHO.  Regarding neck tension, under this process to attain 0.392" chambering tolerances, I cant see where there would be a measurable difference or effect when it comes to neck tension.  </p>
<p>CH</p>
]]></description>
					                    <pubDate>Thu, 19 Nov 2026 01:06:12 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on Rare offering</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/rare-offering-1/#p186929</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/rare-offering-1/#p186929</guid>
					                        <description><![CDATA[<p>Wood is wrong in at least a few ways. Good thing the photos are better than the finishing work. A few other visual clues with the floor plate and caliber stamp but overall a very attractive rifle. I don't think he's quite the snake oil salesman SDOG is but the "special order gun" certainly aroused my suspicions.</p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Thu, 19 Nov 2026 00:43:39 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on The Doc Pardee Club, still looking for....</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/page-2/#p186927</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/the-doc-pardee-club-still-looking-for/page-2/#p186927</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>Bryan Austin said </strong><br />
Indeed John did!!<br />
 <br />
On a side note, the aforementioned target was made with Com Pro full patch bullets and Tinstar powder. Velocity below 44 Henry performance at 1,050fps......but they grouped nicely at 100 yards!!! ...and from a Marlin with a tang. <br />
  </p>
</blockquote>
<p>First I've heard of Tinstar powder, unfamiliar with the bullet as well. Are these Canadian products or do I need to visit the CB forum and get up to date? Sounds like a pretty sweet load.</p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Thu, 19 Nov 2026 00:20:06 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186926</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186926</guid>
					                        <description><![CDATA[<p>Not true if you take the time to find the best neck tension where the bullets in the mag tube don’t move on recoil.  Use a smaller diameter neck expander mandrel. I use modified pin gauges for calibers above about 33 cal.  Under that the target guys can supply standard mandrels that come in .0005″ increments.-Chuck</p>
<p> </p>
<p>That's fine for target shooting, Chuck. What happens with a hunting rifle and the round makes a few trips thru the action and up the feed ramp on a slow hunting weekend? I don't think Zeb will need a crimp for his SS but you are correct that neck tension is more important than a crimp for keeping a bullet where we seated it. I'll always feel better with a moderate crimp for lever guns, tho. I'd be tempted to treat a single shot 38-55 as a BPCR and load a lead bullet with a wad over a case full of Holy Black. My 45-90 loads have nearly zero neck tension, I can pull the bullet with my fingers. This would necessitate Bert's suggestion of opening up the chamber a bit.</p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 23:59:53 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186924</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186924</guid>
					                        <description><![CDATA[<p>Thanks, Chuck.  After making up a dummy and using the FL sizer in the set to squeeze the neck down after seating, but not crimping, a bullet, it became obvious there was sufficient neck tension on the bullet that, for shooting in my 1885, there was no need to crimp, so I don't plan to do so when I begin making up loads to shoot - hopefully some this evening.  </p>
<p>I'm not familiar with the process you're describing and I'm having a little trouble visualizing creating a particular neck tension with an expander madrel. I can visualize an FL sizing die with bushings that size the neck precisely. My notion of the expander die mandrel is to open up the neck - I can see where varying the mandrel diameter could sert the interior diameter of the case neck precisely - and flare the rim enough to allow seating a bullet without shaving it. </p>
<p>Here's a hypothetical:  We know we want to wind up with a bullet seated case neck no thicker than .392.  The bullet is .378.  We install a .373 bushing in the FL sizer and size the case.  Ignoring springback, we should have a case with an inside neck diameter of .373, although not necessarily perfectly round. </p>
<p>Next we install a .376 mandrel in the expander and expand and flare the case.  We get a flared rim that's wide enough to let a bullet to set squarely but the neck is now round with an inside diameter of .376.  </p>
<p>We seat the bullet but do not crimp it. Seating the bullet now increases the outside diameter of the neck to, allowing for brass thickness, <br />
.378 + .020 = .398, necesssitating another trip within the sizer, to bump it down to at least .392, for a chamber neck/mouth of .394.  </p>
<p>I think what you're telling me is the combination of bushing and mandrel provide a precise and repeatable amount of neck tension on the bullet. Would not the subsequent, unmeasurable, trip back through the sizer to squeeze down the assembled cartridge's outside neck diameter, alter the uniformity of the neck tension previously achieved? </p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 23:44:29 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186921</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186921</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>Zebulon said </strong><br />
I may get hold of Redding to see if they have (or would make) a neck resizing die that would take the 38-55 neck exactly to .392.  I have a spare T-7 turret with enough holes to include the FL sizer/decapper, expanding die, seating die, and a neck sizer, to speed a batch along. <br />
At the moment, the Redding press is still in the box and my old Rockchucker is doing all the business, so it's no big thing to unscrew the decapper stem and put the FL sizer back in the press.  <br />
My long ago classmate "Dynamite Dave" believed batch loading was too slow, but then I have never lifted the topstraps of, not one but two, Super Blackhawks. <br />
  </p>
</blockquote>
<p>Talk to Redding or Lee Precision and see if they could make you a <span style="text-decoration: underline">bushing</span> full length sizing die.  This way you could size the neck where you want it and then use expander mandrels to open it back up to the desired neck tension.  Rule of thumb is to use a bushing that is .004" smaller than the neck diameter with a seated bullet.  In the bolt guns we use a mandrel that is .002" smaller than the bullet diameter.  If you want to stop crimping, you would use a different combo. </p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 20:22:58 +0000</pubDate>
                </item>
				                <item>
                    <title>Zebulon on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186919</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p186919</guid>
					                        <description><![CDATA[<p>I may get hold of Redding to see if they have (or would make) a neck resizing die that would take the 38-55 neck exactly to .392.  I have a spare T-7 turret with enough holes to include the FL sizer/decapper, expanding die, seating die, and a neck sizer, to speed a batch along. </p>
<p>At the moment, the Redding press is still in the box and my old Rockchucker is doing all the business, so it's no big thing to unscrew the decapper stem and put the FL sizer back in the press.  </p>
<p>My long ago classmate "Dynamite Dave" believed batch loading was too slow, but then I have never lifted the topstraps of, not one but two, Super Blackhawks. </p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 19:48:23 +0000</pubDate>
                </item>
				                <item>
                    <title>sb on Rare offering</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/rare-offering-1/#p186916</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/rare-offering-1/#p186916</guid>
					                        <description><![CDATA[<p>Maybe Selling Dad’s Old Guns is back</p>
<p> </p>
<p><a href="https://www.gunsinternational.com/guns-for-sale-online/rifles/winchester-rifles-model-70-pre-64/winchester-pre-64-model-70-284-featherweight-special-order-offered-in-1963-only.cfm?gun_id=103931322" rel="nofollow" target="_blank">https://www.gunsinternational.com/guns-for-sale-online/rifles/winchester-rifles-model-70-pre-64/winchester-pre-64-model-70-284-featherweight-special-order-offered-in-1963-only.cfm?gun_id=103931322</a></p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 19:10:40 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186913</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/#p186913</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>1892takedown said </strong><br />
If you have a tubular magazine you have to crimp.  Just saying there seem to get a little flare in the brass at the crimp that will add a couple thousandths of an inch difference at the neck.  Even trying to adjust to the slightest crimp still seems to create a little flare in the brass.  <br />
I have no experience loading for non-Winchester mfg., non-1894 guns.  Just gonna have to experiment a little. <br />
Chris<br />
  </p>
</blockquote>
<p>Not true if you take the time to find the best neck tension where the bullets in the mag tube don't move on recoil.  Use a smaller diameter neck expander mandrel. I use modified pin gauges for calibers above about 33 cal.  Under that the target guys can supply standard mandrels that come in .0005" increments.</p>
<p>Make a dummy round, use a shot out primer, some type of filler and the bullet.  Place the dummy in the tube and start shooting the live rounds. If the dummy bullet moves use a smaller diameter mandrel.  </p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 18:45:09 +0000</pubDate>
                </item>
				                <item>
                    <title>1873man on 3rd Model 1866 with Mortise cover slot</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/3rd-model-1866-with-mortise-cover-slot/#p186910</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/3rd-model-1866-with-mortise-cover-slot/#p186910</guid>
					                        <description><![CDATA[<p>Tony,</p>
<p>This is a slot behind the elevator slot running long ways. The picture caption in the Madis book said it was for a dust cover but I'm guessing it could of been a aftermarket attempt to put a cover one it. The Madis picture is not very good to see detail.</p>
<p>Bob</p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 16:04:27 +0000</pubDate>
                </item>
				                <item>
                    <title>Anthony #5411 on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/page-2/#p186909</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/page-2/#p186909</guid>
					                        <description><![CDATA[<p>Dermot said,</p>
<p>Well I like to study the gun, inspect the original tooling marks, assembly stamps, clean out muck and grime from (in this case storage from 2022 in grease styrofoam and newspapers). I like to learn about how they were made, how they operate. In museums and auctions I see cleaned and preserved pieces. I think my time here has been very short but appreciate the advice on assembly stamps.</p>
<p>As a collector, I also enjoy that on certain pieces as you're is, and not the high end Winchesters that are in very good condition and Museum Quality as we like to say. The well used and worn examples that you shared are great pieces to do just that. IMO!</p>
<p>There's many different levels of Winchester collectors, besides all the different models.</p>
<p>Keep learning and sharing, as we appreciate it! <img class="spSmiley" style="margin:0" title="Smile" alt="Smile" src="https://winchestercollector.org/wp-content/sp-resources/forum-smileys/sf-smile.gif" /></p>
<p>Tony</p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 15:58:55 +0000</pubDate>
                </item>
				                <item>
                    <title>Anthony #5411 on 3rd Model 1866 with Mortise cover slot</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/3rd-model-1866-with-mortise-cover-slot/#p186908</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/3rd-model-1866-with-mortise-cover-slot/#p186908</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>Win-man65 said </strong><br />
Good day, new member here.  I was wondering if anyone has come across a Model 1866 with a slot cut for a Mortise cover?  I found a picture of one in John E. Parsons "The First Winchester" as well as on page 89 of "The Winchester Book"?  I picked up a silver plated 66 with a slot, at first I thought it may have been done after it left the factory, however you can see the slot in the top of the breech bolt that would open the cover.  Cody letters are not available for serial numbers starting with 26***.   Any help would be greatly appreciated.  Thank you.<br />
  </p>
</blockquote>
<p>Welcome Christopher,</p>
<p>I copied this past post from a few months back, that member martin rabeno asked me to post, that I think can help out here, with you're Quest.</p>
<p><a href="https://winchestercollector.org/forum/general-discussions-questions/winchester-m-1866-with-unusual-rear-sight-attachtment/" target="_blank">https://winchestercollector.org/forum/general-discussions-questions/winchester-m-1866-with-unusual-rear-sight-attachtment/</a></p>
<p>Tony</p>
]]></description>
					                    <pubDate>Wed, 18 Nov 2026 15:50:06 +0000</pubDate>
                </item>
				    </channel>
	</rss>
