TXGunNut said
Bert-
Your 110gr 30-06 load reminds me of a load I put together for Speer's little 100gr half-jacket "plinker". It was actually pretty accurate out aways past 100 yards or maybe a certain crow was just very unlucky. We found mostly feathers. 
The grand old cartridge has so many loads that work that I suspect anyone who has loaded much 30-06 has a favorite load but there are probably dozens of them. I even had a rifle that was very fond of the factory RP Core-Lokt 165 factory loads. I bought them for the brass when I was learning to reload, they didn't cost much more than component brass. It was probably a couple of years before I learned to load a round it liked better. 
 
Mike
  

I load 110, 150, 162, 165, 168, and 175 grain bullets for my three different 30-06 rifles.  I once toyed with the idea of loading 180 and 220 grain, but I decided to leave those bullets for my 30-40 Krag rifles.  As of today, I have not ever tried the 125 or 140 grain bullets, but I have some one hand should I ever get the urge.

Bert

Your 110gr 30-06 load reminds me of a load I put together for Speer's little 100gr half-jacket "plinker". It was actually pretty accurate out aways past 100 yards or maybe a certain crow was just very unlucky. We found mostly feathers. 

The grand old cartridge has so many loads that work that I suspect anyone who has loaded much 30-06 has a favorite load but there are probably dozens of them. I even had a rifle that was very fond of the factory RP Core-Lokt 165 factory loads. I bought them for the brass when I was learning to reload, they didn't cost much more than component brass. It was probably a couple of years before I learned to load a round it liked better. 

Mike

Mike

JF44 said
Good Afternoon All, Wondering if I can please receive some feedback on experiences with American Pioneer Powder FFFG for reloading 44-40 for antique Winchesters. If possible, also please let me know who is likely to have this item in stock. In general, I am looking for a black powder substitute that doesn’t run too hot and safely fills a case below a 200 grain bullet. Thank you.
  

What are shooting it in? 

I load all of my 44 WCF cartridges with 2400 powder... a lot easier to load, and very little cleaning effort required.

Bert

Zebulon said
More proof that the '06 is so flexible and useful it gets hard to defend another choice.  That looks like a serious dose of coyote medicine. 
  

Bill,

I load for my 30-06 rifles with many different recipes depending on my intended targets, and yes, it can be loaded for a very wide range of purposes.  In my rifle, the 57.5 grains of IMR 4064 launches the 40-grain V-Max @3,400 fps, and yes, it is serious Coyote medicine.  It would also be great for Antelope.

Bert

If you could order 4000 like I bought, the shipping wouldn't change much and the deal would improve. 

But penny primers are gone for good. 

Still, I think there's room for prices to fall if the price of oil will get down from current highs and various friendly foreign manufacturers continue opening ammo and component factories here. And Remington Ammunition is back on line. All their component runs are still feeding their cartridge production but that will soon catch up and they should be back in the component game as they once were. Vietnam taught ammo makers not to bet the ranch on government contracts. 

Zebulon said

Bert H. said
$.08 - $.10/primer is standard these days.  I really wish that I had bought thousands more of them when they were still just $.01/ primer.  Fortunately, I still have 15K primers in my inventory (though I did use (40) more of my Remington No. 9 ½ primers last night reloading some 30-06 Varmint loads). My next big expenditure will be an 8 lb jug of IMR 4064... at 57.5 grains per cartridge, it does not take very long to empty a 1-lb container!
Bert
  

What bullet over the 57.5/4064?
  

110 grain V-Max.

This is from my reloading data;

Bert

Bert H. said
$.08 - $.10/primer is standard these days.  I really wish that I had bought thousands more of them when they were still just $.01/ primer.  Fortunately, I still have 15K primers in my inventory (though I did use (40) more of my Remington No. 9 ½ primers last night reloading some 30-06 Varmint loads). My next big expenditure will be an 8 lb jug of IMR 4064... at 57.5 grains per cartridge, it does not take very long to empty a 1-lb container!
Bert
  

What bullet over the 57.5/4064?

Zebulon said

steve004 said
Bill -
I like your attitude.  I'm hesitant to buy more than one green banana at once.
  

I lost my best friend in 2004.  We were classmates,  hunting and camping partners for Decades. Odd thing was, I never shed a tear for him until I handed over his application for probate to the court clerk and mentioned to her how much I would miss him. That started the waterworks, to the extent it brought the judge out of his chambers. Grief is a funny thing and sometimes comes on cat feet. 
That is when I decided it didn't cost a nickel more to believe I was going to be a Centenarian, no matter how many friends fell off the twig. 
I expect to keep CCI in business until that hearse horse shows up to haul my bones away. 
  

Bill - Good for you.  I have been noticing you have clearly been walking the walk. I'll try to channel your inspiration.  I happen to be going to the grocery store in a few minutes - maybe I'll buy a bunch of green bananas.  

steve004 said
Bill -
I like your attitude.  I'm hesitant to buy more than one green banana at once.
  

I lost my best friend in 2004.  We were classmates,  hunting and camping partners for Decades. Odd thing was, I never shed a tear for him until I handed over his application for probate to the court clerk and mentioned to her how much I would miss him. That started the waterworks, to the extent it brought the judge out of his chambers. Grief is a funny thing and sometimes comes on cat feet. 

That is when I decided it didn't cost a nickel more to believe I was going to be a Centenarian, no matter how many friends fell off the twig. 

I expect to keep CCI in business until that hearse horse shows up to haul my bones away.