Zebulon said
I am going to revive this semi-compliant thread for just one more post, as a public announcement for the benefit those who, like me, were ignorant of some important (for Savage 99 collectors) facts:
1. Cody Firearms Museum has possession of the Savage manufacturing log archives and offers letter services for Savage 1895 and 1899 and 99 rifles. This service was formerly offered by amateur historians in cooperation with Savage. Wisely, the company has since either gifted or loaned these historical documents to Cody so its staff can continue the good work. As most know, there are record gaps but Cody can advise what serial ranges are not available. 
2. For Model 99 rifles produced during the years 1949 to 1970,  the lever boss was stamped with one or two numbers identifying an inspector, followed by a letter, all inside a circle. The letter is a code for the year of manufacture. 
I have the LEVER BOSS CODE index and will furnish it to any member who PMs me his or her email address. I don't think I can attach a PDF to a forum message. I  got the index from Gemini and Googling "Savage Lever Boss Codes" would probably retrieve it, too. This code is as accurate a d.o.m. determinant as any I can think of, for the 1948 - 1970 date range.
  

Bill, I meant to post this prior and I’ll also make it my last post on this semi compliant thread😊. The S guns make up part of my first model collection.

Savage 1895-DOM(1896)

Savage 1899-DOM(1899)

Savage 250-3000(1915)

Winchester 1895(1896)

Winchester 1873(1875)

Chuck said
Here are some pics.  The marks under the spring are an oval with VP, R-NS, 25-35 and a 3 that is sideways.

Chuck,

The "RNS" is actually "BNS" and it indicates the nickel steel maker.  The oval "VP" is extremely common, as is the sideways "3" (which indicates the high-wall frame type/barrel shank size). 

Bert

Anthony said
Chuck,
What a great example you have there. On the tang stamps, by bringing the pic in closer you can see an "X", on the left of the mark, as a pr-strike, or shadow "X", kinda if you will. Even left of the what looks like a broken "R", and a partial mark is seen, as it makes me wonder if the rifle was sent back or possibly used from another S S rifle?
What a great configuration and High Wall!
Tony
  

Letter does not show a return to the Factory.  The 7806 on the tang is also stamped into the upper channel of the stock. 

What a great example you have there. On the tang stamps, by bringing the pic in closer you can see an "X", on the left of the mark, as a pr-strike, or shadow "X", kinda if you will. Even left of the what looks like a broken "R", and a partial mark is seen, as it makes me wonder if the rifle was sent back or possibly used from another S S rifle?

What a great configuration and High Wall!

Tony

Bert H. said

Chuck said

Bert H. said
Chuck,
Great looking Single Shot   Please remind what the serial number on it is.
Bert
  

Sorry, I thought you got it when you looked at it.  109325.  When I took the gun apart there is a C marked on the barrel?
  

Please send me pictures of the under barrel markings and markings on the left side of the lower tang.  The 24-inch barrel makes it a special order "short" rifle.
Bert
  

The only marking on the barrel that is not under the flat spring is a C.  I really don't want to remove the spring.  I will pull the stock again when I can.  One thing I forgot to tell you is the tang has a R or or maybe a K?

Chuck said

Bert H. said
Chuck,
Great looking Single Shot   Please remind what the serial number on it is.
Bert
  

Sorry, I thought you got it when you looked at it.  109325.  When I took the gun apart there is a C marked on the barrel?
  

Please send me pictures of the under barrel markings and markings on the left side of the lower tang.  The 24-inch barrel makes it a special order "short" rifle.

Bert

Zebulon said
Excellent buy, Chuck. The wood is very conservatively graded "X "  from what I can see. 
If you ever neck down .30 WCF brass to produce .25-35 brass, MidwestCrisis would appreciate tips on that subject. 
  

No need for me to modify brass.  I have some Win 25-35 brass.  Book says you can use 30 WCF or 32 Wins Spl.  Never messed with this one.  It appears the shoulder and neck on the 30 WCF have a larger diameter.  Reduce these and it should go in to fire form. 

Bert H. said
Chuck,
Great looking Single Shot   Please remind what the serial number on it is.
Bert
  

Sorry, I thought you got it when you looked at it.  109325.  When I took the gun apart there is a C marked on the barrel?

TXGunNut said
Very nice, your persistence paid off. I think you told me what scope is on it but I forgot. 
 
Mike
  

Mike, the scope is a B5.

If you ever neck down .30 WCF brass to produce .25-35 brass, MidwestCrisis would appreciate tips on that subject. 

Great looking Single Shot   Please remind what the serial number on it is.

Bert